 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| INTEGRATED CIRCUITS 74ALS153 Dual 4-input multiplexer Product specification IC05 Data Handbook 1991 Feb 08 Philips Semiconductors Philips Semiconductors Product specification Dual 4-input multiplexer 74ALS153 FEATURES * Non-inverting outputs * Common select outputs * Separate enable for each section * See 74ALS253 for 3-State version DESCRIPTION The 74ALS153 has two identical 4-input multiplexer with 3-State outputs which selects two bits of data from four sources by using common select inputs (S0, S1). The two 4-input multiplexer circuits have individual active-Low enables (Ea, Eb) which can be used to strobe the outputs independently. Outputs (Ya, Yb) are forced Low when the corresponding enable is high. The 74ALS153 is the logic implementation of a 2-pole, 4-position switch where the position of the switch is determined by the logic levels supplied to the common select inputs. PIN CONFIGURATION Ea S1 I3a I2a I1a I0a Ya GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC Eb S0 I3b I2b I1b I0b Yb SF00146 ORDERING INFORMATION ORDER CODE DESCRIPTION COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C 74ALS153N 74ALS153D 74ALS153DB DRAWING NUMBER SOT38-4 SOT109-1 SOT338-1 TYPE 74ALS153 TYPICAL PROPAGATION DELAY 7.0ns TYPICAL SUPPLY CURRENT (TOTAL) 6.5mA 16-pin plastic DIP 16-pin plastic SO 16-pin plastic SSOP Type II INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS Ioa - I3a Iob - I3b S0, S1 Ea Eb Ya, Yb DESCRIPTION Port A data inputs Port B data inputs Common select inputs Port A enable input Port B enable input Data outputs 74ALS (U.L.) HIGH/LOW 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 130/240 LOAD VALUE HIGH/LOW 20A/0.1mA 20A/0.1mA 20A/0.1mA 20A/0.1mA 20A/0.1mA 2.6mA/24mA NOTE: One (1.0) ALS unit load is defined as: 20A in the High state and 0.1mA in the Low state. LOGIC SYMBOL 6 5 4 3 10 11 12 13 IEC/IEEE SYMBOL 14 2 0 G 1 0 3 I0a 14 2 1 15 S0 S1 Ea Eb I1a I2a I3a I0b I1b I2b I3b 1 6 5 4 3 EN 0 1 2 3 MUX 7 Ya Yb 15 10 11 12 9 7 VCC = Pin 16 GND = Pin 8 9 13 SF00147 SF00148 1991 Feb 08 2 853-1376 01670 Philips Semiconductors Product specification Dual 4-input multiplexer 74ALS153 LOGIC DIAGRAM Ea 1 I0a 6 I1a 5 I2a 4 I3a 3 S1 2 S2 14 I0b 10 I0b I2b I3b 11 12 13 Eb 15 7 VCC = Pin 16 GND = Pin 8 Ya Yb 9 SF00149A FUNCTION TABLE INPUTS S0 L L H H L L H H H = High voltage level L = Low voltage level X = Don't care S1 L L L L H H H H I0n L H X X X X X X I1n X X L H X X X X I2n X X X X L H X X I3n X X X X X X L H En L L L L L L L L OUTPUT Yn L H L H L H L H 1991 Feb 08 3 Philips Semiconductors Product specification Dual 4-input multiplexer 74ALS153 ABSOLUTE MAXIMUM RATINGS (Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in high output state Current applied to output in Low output state Operating free-air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to VCC 48 0 to +70 -65 to +150 UNIT V V mA V mA C C RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL VCC VIH VIL IIk IOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature range 0 PARAMETER MIN 4.5 2.0 0.8 -18 -2.6 24 +70 NOM 5.0 MAX 5.5 V V V mA mA mA C UNIT DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS1 MIN VO OH High-level High level output voltage VCC = 10%, VIL = MAX, , , VIH = MIN VCC = MIN, VIL = MAX, , , VIH = MIN VCC = MIN, II = IIK VCC = MAX, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.4V VCC = MAX, VO = 2.25V VCC = MAX -30 6.5 IOH = -0.4mA IOH = MAX IOL = 12mA IOL = 24mA VCC - 2 2.4 3.2 0.25 0.35 -0.73 0.40 0.50 -1.5 0.1 20 -0.1 -112 12 LIMITS TYP2 UNIT MAX V V V V V mA A mA mA mA VO OL VIK II IIH IIL IO ICC Low-level Low level output voltage Input clamp voltage Input current at minimum input voltage High-level input current Low-level input current Output current3 Supply current (total) NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. 1991 Feb 08 4 Philips Semiconductors Product specification Dual 4-input multiplexer 74ALS153 AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITION Tamb = 0C to +70C VCC = +5.0V 10% CL = 50pF, RL = 500 MIN tPLH tPHL tPLH tPHL tPLH tPHL Propagation delay In to Yn Propagation delay Sn to Yn Propagation delay En to Yn Waveform 1 Waveform 2 Waveform 2 4.0 4.0 5.0 7.0 3.0 5.0 MAX 12.0 12.0 15.0 16.0 10.0 12.0 ns ns ns UNIT AC WAVEFORMS For all waveforms, VM = 1.3V. In Sn VM tPHL En tPLH tPHL VM VM VM tPLH Yn VM VM Yn VM VM SF00150 Waveform 1. Propagation Delay for Data to Output SC00046 Waveform 2. Propagation Delay for Select or Enable to Output TEST CIRCUIT AND WAVEFORMS VCC NEGATIVE PULSE VIN PULSE GENERATOR RT D.U.T. VOUT 90% VM 10% tTHL (tff) CL RL tw VM 10% tTLH (tr ) 0.3V 90% AMP (V) tTLH (tr ) 90% tTHL (tf ) AMP (V) 90% VM tw 10% 0.3V Test Circuit for Totem-pole Outputs POSITIVE PULSE 10% VM DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators. Input Pulse Definition INPUT PULSE REQUIREMENTS Family Amplitude VM 74ALS 3.5V 1.3V Rep.Rate 1MHz tw 500ns tTLH 2.0ns tTHL 2.0ns SC00005 1991 Feb 08 5 Philips Semiconductors Product specification Dual 4-input multiplexer 74ALS153 DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4 1991 Feb 08 6 Philips Semiconductors Product specification Dual 4-input multiplexer 74ALS153 SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 1991 Feb 08 7 Philips Semiconductors Product specification Dual 4-input multiplexer 74ALS153 SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1 1991 Feb 08 8 Philips Semiconductors Product specification Dual 4-input multiplexer 74ALS153 DEFINITIONS Data Sheet Identification Objective Specification Product Status Formative or in Design Definition This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Preliminary Specification Preproduction Product Product Specification Full Production Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1997 All rights reserved. Printed in U.S.A. Philips Semiconductors 1991 Feb 08 9 |
Price & Availability of 74ALS153N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |